Motorcycle Carriers     |     home
Carrier Back   |   Carrier angle view   |   Carrier Side View   |   Special Tire Stabilizing Slot   |   Tie Down Attachment Points   |   Q & A   |   HD Sportster   |   Sportbike   |   Tie down points and tips

Tie down points and tips
Tie front wheel toward the front and down.
Wrap tie down strap around the carrier,  tire and wheel to make sure the wheel is secure.
Tie rear wheel down.
Wrap tie down strap around the carrier,  tire and wheel to make sure the wheel is secure.
Ramp is included
Carrier end showing attachment point for ramp, note Heavy Duty thickness.
 
19 inches of clearance from the carrier to the mounting pin hole
Front Wheel Slot, cut to help stabilize your bike, Smaller Slots for Scooters are available.
* Some carriers come with 2 mounting pin holes to adjust for clearance of Spare tire or Lader.
Use the 2nd mounting pin hole, allowing the carrier to slide further into the receiver, to get maximum strength, if clearance is not needed.
* An additional rubber tie down strap can be used between the drivers side rear bumper and the carrier to reduce the possibility of noise, or rattle.

All Text and Images on this site are the copyrighted property of
www.ourlocalguide.com and May not be used without our written permission
 ~ All Rights Are Reserved by ourlocalguide.com ~